~ / archivo / majorgeeks / 223518
MoBo Overheat is Back
MajorGeeks
· Hardware
· pregunté
-
I started some weeks ago this thread:
http://forums.majorgeeks.com/showthread.php?t=222321
Now i can see the Board is overheating in a specific area, according to the Manual is the Intel 82946GZ GMCH, i readed more and is the Video Chip in the MoBo.
It have like a metalic stuff over it (don't know if i remove it without kill the board).
http://img836.imageshack.us/img836/1852/boardoverheat.png
That part is overheating alot, i solved it using a Cooler but i want to fix it because it never had that problem before.
Actually im working with that Mobo without problem using cooler but any suggestions to fix it will be appreciated.
EDIT:**: PC have 3 GB RAM, and i didn't run anything (process or programs) and get warm, also i had to add a new cooler that didn't need before. -
holiday mensaje 2010-09-24 00:02I would clean the computer thoroughly with compressed air, perhaps add another exhaust fan (check the existing ones to make sure they're working well) and get the computer off the floor if it's on it. I doubt it would be a driver causing the issue... although
-
augiedoggie mensaje 2010-09-24 06:51DO NOT remove the heatsink from the chip(s) unless you are ready to change the Thermal Interface Material(TIM). Putting a fan on that area is excellent along with the ideas from holiday.
-
holiday
I would clean the computer thoroughly with compressed air, perhaps add another exhaust fan (check the existing ones to make sure they're working well) and get the computer off the floor if it's on it. I doubt it would be a driver causing the issue... althoughaugiedoggie
Thanks for advices, i already used compressed air and a special liquid to clean "contacts" like alcohol but designed for clean chips and those things.
DO NOT remove the heatsink from the chip(s) unless you are ready to change the Thermal Interface Material(TIM). Putting a fan on that area is excellent along with the ideas from holiday.
I guess is better let it like now, just that new fan is doing the work, i have Thermal Stuff for processors but don't know if is the same for chips.
Thanks again.:zzz -
augiedoggie mensaje 2010-09-24 11:50
itmortiz
Ya, that's the problem as these other chips may take pads and not Arctic Silver goop, I found that out on my board. Do some research at your mobo's makers forums site if they have one.
I guess is better let it like now, just that new fan is doing the work, i have Thermal Stuff for processors but don't know if is the same for chips.
Thanks again.:zzz
I still can't understand why the temps would fluctuate, maybe a bad sensor? Have you touched the heatsink with your finger yet and does it feel as hot as it is supposed to be? -
augiedoggie
- goop?
Ya, that's the problem as these other chips may take pads and not Arctic Silver goop, I found that out on my board. Do some research at your mobo's makers forums site if they have one.
I still can't understand why the temps would fluctuate, maybe a bad sensor? Have you touched the heatsink with your finger yet and does it feel as hot as it is supposed to be?
- heatsink?
Oh man... so much English... i will translate and tell you :eek: -
augiedoggie mensaje 2010-09-25 11:27
itmortiz
I'm sorry senor, goop = thermal paste, a very thick white compound that helps in the transfer of heat from the chip to the heatsink.
- goop?
- heatsink?
Oh man... so much English... i will translate and tell you :eek:
Heatsink= the silver thing inside your red box. There is a smaller heat producing chip(s) under that. Here is a link to a Wiki page and perhaps there is an equivalent page in your language. Good luck.:) -
pclover mensaje 2010-09-25 17:00I think it would be okay to use the same as cpu's as long it's not electrically conductive.
Wouldn't suggest AS5 for the Northbridge
http://www.newegg.com/Product/Product.aspx?Item=N82E16835608008 Expensive but well worth it. I use it.
I think it's just as good as Artic Silver but non electrically conductive.